Panasonic KX-F590 - Manual (Page 7)

Installation and Preparation
Control panel
© DIRECTORY button (pages 12, 17 and 34)
Used for speed dialing. Also used for the
electronic telephone directory.
@ MENU button
Used to start and exit various programming.
@ RECEIVE MODE button (page 11)
Used to select the desired receiving mode.
© RESOLUTION button (page 15)
Used to adjust scanning line density.
@ Direct call station keys (pages 12, 17 and 29)
Used for one-touch dialing. Also used as
character keys when logo and station names
are programmed.
(§) HELP button (page 3)
Used to print an easy guide of operations.
@ LOWER key (pages 12, 17 and 32)
Used to access lower stations (6 to 10) for
one-touch dialing.
@ TONE button (page 49)
Used to temporarily change the dialing mode
from pulse to tone during a dialing operation.
Dial keypad
Used for dialing operation and parameter
setting. Also used as character keys.
@ SP-PHONE/VOICE STDBY button
(pages 12 and 48)
Used for on-hook dialing and voice contact
features.
(Jl) MUTE button (page 13)
Used for voice muting.
@ REDIAL/PAUSE button (pages 13 and 49)
Used to redial the last dialed number. Also
used to insert a pause into a phone number.
@ FLASH button (page 49)
Used as a hook button. Also used to access
some features of your host exchange.
@ STOP button (page 16)
Used to stop fax communication.
@ COPY button (page 25)
Used to start copying.
® START/SET button
Used to start fax communication. Also used to
store parameters during programming.
(© VOLUME buttons (page 10)
Used to adjust the volume level of the ringer,
speaker and handset.