Panasonic CQ-DF602U - Manual (Page 51)

Specifications
□ General
Power supply:
Current consumption:
Maximum power output:
Tone adjustment range:
Bass:
Treble:
Suitable speaker impedance:
Preamp output voltage:
Subwoofer output voltage:
Pre-Amp output impedance:
12 V DC {11 V-16 V), test voltage 14.4 V, negative ground
Less than 2.2 A (CD play mode; 0.5 Wx4 channels)
50 Wx4 channels at 1 kHz, volume control maximum
±12 dB at 100 Hz
±12 dB at 10 kHz
4-8 0
2.5 V (CD play mode; 1 kHz.OdB)
2.5 V
200
0
Subwoofer output impedance: 200 O
Dimensions (WxHxD):
Weight:
7"X115/16"X 5V b " (178X 50X150 mm)
3 lbs. 8 oz (1.6 kg)
□ FM Stereo Radio
Frequency range:
Usable sensitivity:
50 dB quieting sensitivity;
Frequency response:
Alternate channel selectivity:
Stereo separation:
Image response ratio;
IF response ratio:
Signal/noise ratio:
87.9 MHz-107.9 MHz
11.0 dBf. (1.25 цV, 75 O)
15.2 dBf. (1.6 цV, 75 O)
30 Hz-15 kHz (±3dB)
75 dB
35 dB (1 kHz)
75 dB
100 dB
70 dB
□ AM Radio
Frequency range:
Usable sensitivity: 530 kHz-1 710 kHz
29dB/nV (25
m V, S/N 20 dB)
□ CD Piayer
Sampling frequency:
DA converter:
Error correction system:
Pick-up type:
Light source:
Wave length:
Frequency response:
Signal/noise ratio:
Total harmonic distortion:
Wow and flutter:
Channel separation:
8 times oversampling
MASH-1 blt/4 DAC system
Panasonic super decoding algorithm
Astigma 3-beam
Semiconductor laser
780 nm
20 Hz-20 kHz(±1 dB)
96 dB
0.01 % (1 kHz)
Below measurable limits
75 dB
Above specifications comply with EIA standards.
Note:
• Specifications and the design are subject to modification without notice due to improvements in technology.
CQ-DF602U
51