Panasonic OMNIVISION PV-4661 - Manual (Page 16)

RecordOnaT^pe
Check list before you begin.
All connections are made.
(See pages e-S.)
VCR is Plugged in.
TV is turned on and set to the VCR
channel (CH3 or CH4).
/?T\ Insert a cassette with record tab
• VCR power comes on automatically.
Push VCR CH
A/T
or
NUMBERED keys to
select a channel.
• Or, push VCR CH
A/T
on
the VCR.
• To record from an outside
source, push VCR CH
A/T
to
select “LINE” (see next page).
SPEED (
Push SPEED to change
current recording speed.
• SP = Standard Play, LP ^ Long
Play, SLP = Super Long Play.
REC/TIME
Push REC/TIME
to start recording.
• Or, push PLAY and
REC/TIME on VCR. f
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off
at a preset time.
Continue to push REC/TIME to set ^NormaiRec-H}30-
the recording length. Each Push will
change the stop time as shown.
• "TIMER" lights in the Multi Function Display.
^4ffi)4-3i0^2t)04-130 130+^
Push STOP to
stop recording.
• Or, push STOP on the VCR.
Watching Another TV Program
1
Push VCR/TV while recording is in progress to turn
off the VCR indicator in the Multi Function Display.
2
Use the TV channel controls to select a
program. The VCR will continue to record your
program while you watch any channel you
choose.
• Switch back and forth between the recording and
viewing channel with the VCR/TV selector.
Selecting Channels at the VCR
1
Turn TV on.
N I y'
-VCR-
I N
Multi- Function
Display
If indicator doesn't light, push VCR/TV to turn it on.
2
Use VCR CH Up/ Down buttons to select
channels for viewing or recording.
• To resume TV control channel selection, push VCR/TV
to turn VCR indicator off, or simply turn VCR off.
Holding down the VCR CH
A/T
buttons will increase the channel search speed.
Push PAUSE to pause a recording in progress. (After ttie VCR has been in Pause mode for 5 minutes, it will
stop automatically to protect the tape and video head.)
The recording time remaining appears if the DISPLAY button is pushed during OTR mode.
16