Editing programs, Operation, Press – Panasonic DMR-T3030 User Manual
Page 36: Direct navigator, Press [a,t] to select the program, Press [►] so the submenu appears, Press [a, ▼] to select the item and press [enter, To clear the program list, To stop partway through, Erase program
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing programs
u
UJ
Operation
Press
[DIRECT NAVIGATOR]-
Press [ A , T ] to select
the program.
• You can also select programs by
entering a 2-digit number with the
numbered buttons.
Example:
“5”; [0] -¥ [5]
Press [►] so the
submenu appears.
Press [ A , ▼] to select
the item and press
[ENTER].
Numbered
buttons
DIRECT
-
NAVIGATOR
A, T,
ENTER
ÜTWW
0 (D ®
Qj© 0
ry]@ @
RETURN
To
Clear the program
list
Press [DIRECT NAVIGATOR].
To stop partway through
Press [RETURN],
or select “Cancel” or “No" and press
[ENTER],
For your reference
\Nhen the disc is write-protected,
you can only access “Properties".
Release the write-protection to
access other items.
Erase Program
rFrmnman
The program, and play lists
created from it, is erased
irretrievably when you use this
procedure. Check it carefully
before proceeding.
Enter Title
You can enter up to 64 characters
(DVD-RAM) or 44 characters (DVD-R).
Entering text page 33
Properties
Program information (e.g., time and
date) is shown.
r*rop«rtlgt
[ Soe^~
TS—IB
Ditt 7/<arzeiniE rnt
_u.
PI
I
Protection
If set, this will protect the program
from accidental erasure. The setting
may be activaied/deactivated as you
wish.
Up Program Protacllon.
Shorten Segment
The program segment, and play
list scenes created from it, is
erased irretrievably when you use
this procedure. Check it carefully
before proceeding.
Divide Program
Select a point at which to divide a
program into two.
• The divided programs retain the title
of the original program. They also
remain CPRM property page 8)
of the original.
• A minute portion of the recording
directly preceding the division point
may be lost.
You must be sure you wish to
divide a program because once a
program has been divided It
cannot be returned to its original
form.