Receiving with distinctive ring service, Programming the distinctive ringing pattern – Panasonic KX-F560 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8
.
Advanced Operations
Receiving with distinctive ring service
This unit has been equipped with a ring pattern detection feature. This feature enables you to use the
distinctive ring service provided by your telephone company effectively.
The distinctive ring service gives you up to 3 phone numbers on a single telephone line, each with a
different ring pattern.
When you wish to use one of the phone numbers as a facsimile telephone number, program the ringing
pattern allocated for fax use. When the unit detects a call matching the selected distinctive ringing pattern,
the unit will automatically activate the fax function to receive documents.
To use this feature properly, set the unit to the TEL/FAX or EXT. TAM mode (if an answering machine is
used).
In the TEL/FAX mode, when a distinctive ring pattern is detected, the unit will automatically answer the line
and activate the fax function to receive documents. If other ringing patterns are received, the unit will ring
until you pick up the phone.
In the EXT. TAM mode, when a distinctive ring pattern is detected, the unit will automatically answer the line
and activate the fax function to receive documents. If other ringing patterns are received, the unit and the
answering machine will activate depending on the call.
Note:
•
For more information on the distinctive ring service, please contact your telephone company.
• The unit answers a distinctive ring call after the second ring automatically. To change the number of rings,
change the FAX ring count (see page 19) after setting the ring detection feature.
• When in the FAX mode, the unit will automatically answer all calls and activate the fax function.
• When in the TEL mode, you have to answer all calls manually.
Programming the distinctive ringing pattern
Ringing patterns that can be programmed:
A:
Standard ring (One long ring)
B:
Double ring {Two short rings)
C:
Triple ring (Short-long-short rings)
D:
Other triple ring (Short-short-long rings)
OFF:
Turns off the ring pattern detection feature (initial setting)
IMENUI
О
СЁ) сю CD
0
START/iSETl
О
Press MENU.
1.SYSTEM SET UP
Press #, then 31.
RING DETECTION
Press START/SET.
MODE=OFF [ A T ]
REDIALPAUSE
START/fsin
0
О
IMENUI
О
Press
A
or
T
to select
the desired ring pattern.
—If this feature is not
required, select “OFF”.
Press START/SET to
store the setting.
Press MENU to end the
program.
39