Panasonic SL-SX221C - Manual (Page 4)

Other Play Methods
The letters such as O in the illustrations refer to the descriptions in the “Location of Controls” section. (See page 2.)
Skip play
The disc plays from the specified track through to the
last track, then play stops automatically.
Preparation: Put unit in stop mode. (See page 3.)
RAtJDOM
llRESUME
Q O l l O D I
2 Select the desired track.
Program play
Up to 24 tracks can be entered in the program.
Preparation: Put unit in stop mode. (See page 3.)
RANDOM
NCBI llRESUME
I 0 0 I I 0 0 I 1
2 Select the desired track.
3 Register in sequence.
(The indication "M" and the programmed sequence
appear on the display.)
MEMOflY/RECALL
О
4 Repeat steps 2 and 3 to program all the
desired tracks.
Anti-Shock Function
e
c
A.SHOCtr
The lollowing indicator appears on the display.
В
r i r n
A.SH0CK
U ' J U
If “
f
" is dispiayed
No more tracks can be programmed.
To confirm the contents of the program
Press [MEMORY/RECALL] while the disc is playing.
(The number of the programmed tracks appear on
the display in sequence.)
To delete the entire program
Press [■, OPR OFF],
Random play
1
HORlIlHEaUME
I I O O I I O O I I
Release
For your reference:
•It is also possible to press while the unit is in
stop mode to change the first track to be played, (All
tracks are played eventually, regardless of which is
played first.)
•Program play is not possible in the random mode.
Resume play
This function allows you to listen from the beginning of
the track where play stopped because the unit was
powered off (or switched to stop mode). It is useful
when listening to CDs in the car, etc.
RANDOM
[ I o o l l o o I
Release
To program the same track In the sequence more
than once
After step 3, press [MEMORY/RECALL] desired
number of times.
For your reference:
• If [NOR, RANDOM, RESUME] is pul in the [RESUME]
position, the all-track repeat function will be activated
automatically as soon as the unit is powered on.
•If power is cut off near the end of a track (off mode),
playback may resume from the beginning of the next
track,
• If the unit is powered off while a disc was playing and
then a new disc is inserted, play will begin from the
middle of the new disc because the unit remembers
the position where play stopped on the previous disc.
Anti shock works by reading audio data and storing it in
memory. The unit then fills in interruptions caused by
bumps and vibrations with data from the memory.
[ SL-SX270~1 1 up to 40 seconds worth
I ^,4500^1 : up to 10 seconds worth
This unit also incorporates a powerful anti-shock mech­
anism that prevents skipping caused when play speed
is changed by swinging of the unit.
Press during play or stop mode.
0
To cancel the anti-shock function
Press [A.SHOCK] again.
Repeat function
Press during play or stop mode.
CD
The setting is switched in the sequence indicated below
each time [
1 is pressed.
1 -track repeat (1 )<—
One track is repeated.
i
Atl-track repeat (ALL
All the tracks on the
disc are repeated.
i
Cancel (no indicator is shown)
For your reference:
If [ CD ] is pressed during program play, only the tracks
in the program are repeated.
(The indication “ALL" is not displayed.)
Changing the sound quality
Press during play or stop mode.
EQ
О
The setting switches in the sequence indicated below
each time [EO] is pressed.
S-XBS-
t__
^TnAIN-^Canoel (гю indicator is shown)
J
S-XBS;
Select this setting to boost the low-range response.
TRAIN;
Select this setting to avoid annoying other passengers
with noise from your earphones while riding on the train,
or to reduce fatigue when listening for a long period of
time.
If you have pressed [A.SHOCK] when the unit is in stop
mode, press [^11] to start play.
When bumps continue repeatedly
The message "SORRY” appears on the display and
sound is interrupted.
•The anti-shock setting can be changed during play,
but this may cause a slight interruption in the sound
because the disc's rotation speed changes.
•During anti-shock operation, the disc rotates at a high­
er rale than usual to collect extra audio data. This
could result in a slight increase in disc rotation noise.
Listening to sound with the unit con­
nected to an audio system
The anti-shock function uses digital signal compression
technology. It is recommended that the anti-shock func­
tion be canceled if the unit is connected to a home
audio system.
RQT5363