Changing the dust bag – Panasonic MC-V6945 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CHANGING THE DUST BAG
Always operate the vacuum with a genuine Panasonic Type U3 or U6 dust bag installed
Panasonic dust bags may be ordered through any authorized Panasonic dealer
Pull outward on the
dust cover grip,
located on the top
front of the dust
cover and remove
the cover
To remove the dust
bag, grasp the
cardboard portion
of dust bag and
pull It out
Spread out the end of the
new dust bag
NOTE.
Pull carefully so
as not to tear the bag at
the folds
- p"
■
CD
■
□ o
CD
CD
Attach the new dust
bag onto the bag
holder by holding
the bag collar and
pushing back as
Illustrated
The dust bag must be
completely installed
inside the dust
compartment for
proper operation
The dust bag should
not be caught
between the
lower edge of
the dust cover
and the gasket
as indicated by
the arrow in
the illustration
Reinsert the tabs
provided on the end
of the dust cover into
the grooves on the
dust compartment
and press the
cover into place
NOTE
The dust
cover must be
completely
and correctly
installed for
proper
operation
Grooves
- 1 3 -