Connect Tech BLUESTORM UNIVERSAL PCI CTIM-00015 - Manual (Page 23)

BlueStorm Installation Guide, Connect Tech Inc.
Revision 0.08 23
Hardware Installation
Turn the power off to your computer and open it to expose the expansion slots (consult your
system’s documentation for more information about this procedure).
Choose an available PCI expansion slot, remove the expansion slot cover and insert the
BlueStorm adapter, pushing down gently until the board seats fully in the slot. Secure the
BlueStorm card to the computer chassis.
Software/Driver Installation
BlueStorm provides support for QNX 4.X/6.X, Windows 2000/CE/XP/XPe/XP x64/Server
2003/Server 2003 x64,Vista, VxWorks, Ardence RTX and Linux. For installation guidelines
and driver codes, please refer to the appropriate directories on the BlueStorm CD. For further
information concerning software installation of BlueStorm products please visit Connect Tech’s
Download Zone.
If you are interested in a device driver for an operating system not listed please contact the
Connect Tech Sales Department .
Specifications
Operating Environment
BlueStorm/LP
■
Storage temperature: -55°C to 125°C
■ Operating temperature: 0°C to 70°C
■ Humidity: 5 to 95% non-condensing
BlueStorm/SP, BlueStorm/SP Opto and BlueStorm/SP RJ-11
■
Storage temperature: -55°C to 105°C
■ Operating temperature: 0°C to 70°C
■ Humidity: 5 to 95% non-condensing
PCI Bus Interface
BlueStorm/LP
3.3V or 5V PCI bus.
Please note that the BlueStorm/LP can ship with low and standard profile brackets.
BlueStorm/SP, BlueStorm/SP Opto and BlueStorm/SP RJ-11
3.3V or 5V PCI bus
Communications
Baud Rates
RS-232: 50 bps – 921.6 Kbps
RS-422/485: 50 bps – 1.8432 Mbps
Custom baud rates are also available; please contact our Sales Department for information.