Optional equipment connection and operation, To audio amp connection (stereo), Video/audioconnection – Panasonic CT-31SF14 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Optional Equipment Connection and Operation
To Audio AMP Connection (Stereo)
TERMINALS ON BACK OF TV
• To Audio AMP
Connect to an external audio amp auxiliary input for monitoring sound through a stereo system.
NOTE:
‘TO AUDIO AMP” terminals cannot be used for external speakers.
Adjustment
- When an audio amp is connected to ‘TO AUDIO AMP” terminals:
1. Select TV SPEAKERS “ON ” Mode. (Refer to the Audio Menu TV Speakers section.)
2. Set volume of audio amp to near minimum.
3. Adjust volume of TV to desired listening level.
4. Adjust volume of audio amp to match the level of TV.
5. Select TV SPEAKERS “OFF&VAO ” Mode. (Refer to the Audio Menu TV Speakers section.)
6. Audio bass, treble, balance, volume and mute can now be controlled by the TV Remote Control.
NOTE:
When Selecting TV SPEAKERS “OFF&FAO” Mode, the TV sound output is always at a constant level and cannot
be changed (Refer to the Audio Menu TV Speakers section).
Video/AudioConnection
VCR or VIDEO DISC
TERMINALS ON BACK OF TV
TERMINALS ON
BACK OF VCR
Operation
1. Connect optional equipment as shown to INPUT 1 or 2.
2. Select the desired Video mode by pressing the TVA/IDEO button (or refer to the Input Select Menu).
NOTE:
You must select the same VIDEO Mode that the equipment is connected to.
3. Operate optional equipment (VCR-VDP) as instructed in Optional Equipment manual.
- 7 -