Return, Home theater, Selecting digital output – Panasonic DVD-CV35 User Manual
Page 36: 1 press [action] in the stop mode, 2 bitstream»2, Selecting digital, Output, L/f!j.c5@|5, Press [action] in the stop mode
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2
-
3-4
!:
■ if--- ^
\
L CO &i CIП) (К.3
ro CO © ©
l/f!J.C5@|5=
(^; i®J @3
RETURN
1
ACTION
*-0
O <.L0l9cMnau3ses
I
O 2 Ratings
Level 8^
■B 3 Menu Language
English
4 On-Screen Messages
■■ 5 FL Display
Bright
8L 6 TV Aspect
4:3
WL 7 Digital Audio Output
9 Other Settings
Press RETURN to exit
V
__________ y
■
Home theater
S
(D
O
Ê
<D
E
s.
Q
0
a,
a<
Dialtal Audio Output
_No.
]
' 2 Dolby Digital Bitstream
3 OTSChfflalSufiasid Off
' Press RETURN to exit
Selecting digital output
Select the digital output to be output from the optical digital audio out*
put terminal of the unit.
1
Press [ACTION] in the stop mode.
The initial settings screen is displayed.
2
Press the cursor buttons [ A , T ] to
select “7 Digital Audio Output” and
press [ENTER].
3
Press the cursor buttons [ A , T ] to
select the item and press [ENTER].
1 PCM Down Conversion
Select whether to output audio on DVD recorded in 96 kHz
linear PCM as is (No) or to convert it to 48 kHz for output
(Yes).
2 Dolby Digital
To select the signal format (Bitstream or PCM) to be output
from the optical digital audio output terminal during play of
DVDs recorded in Dolby Digital.
3 DTS Digital Surround
To select whether DTS Digital Surround bitstream is output
from the optical digital audio output terminal or no digital
audio is output during play of DVDs recorded in DTS
Digital Surround.
4
Press the cursor buttons [A, ▼] to
select the setting and press [ENTER].
When “1 PCM Down Conversion” is selected
1 No (Factory preset)
No digital audio is output during play of DVDs recorded in
96 kHz linear PCM.
• If the DVD is recorded in 48 kHz linear PCM, digital audio
converted to 48 kHz/16 bit is output regardless of the
setting.
•Audio will be output using the original audio recording
system if the DVD has not been copyright-protected.
2 Yes*i
During play of DVDs recorded in 48 kHz or 96 kHz linear
PCM, digital audio converted to 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted to 48 kHz/16 bit or
below for copyright protection.)
When “2 Dolby Digital” is selected
1
Bitstream**
2 (Factory preset)
Dolby Digital bitstream (1ch-5.1ch) is output during play of
DVDs recorded in Dolby Digital.
2 PCM
Digital audio converted to 48 kHz/16 bit PCM (2ch) is out
put during play of DVDs recorded in Dolby Digital.
When ”3 DTS Digital Surround” is selected
1 Off {Factory preset)
No digital audio is output during play of DVDs recorded in
DTS Digital Surround.
2 Bitstream»2
DTS Digital Surround bitstream (1ch-5.1ch) is output dur
ing play of DVDs recorded in DTS Digital Surround.
The screen illustrated in step 2 is displayed.
To cancel during setup operation
Press [RETURN]. (The previous screen is displayed.)
To exit the initial settings screen
Press [ACTION] or [RETURN].