Panasonic EY6181 - Manual (Page 2)

IMPORTANT SAFETY
INSTRUCTIONS
WARNING:
When using electric toots,
basic safety precautions should always be
followed to reduce the risk of fire, electric
shock and personal injury, including the
following:
READ ALL INSTRUCTIONS
BEFORE USING
1) KEEP WORK AREA CLEAN. Cluttered
areas and benches invite accidents.
2) CONSIDER WORK AREA ENViRONMENT.
Do not expose power tools to rain.
Do not use power tools in damp or wet
locations.
Keep work area weli lit.
Do not use tooi in presence of flammable
liquids or gases.
3) GUARD AGAINST ELECTRIC SHOCK.
Prevent body contact with grounded
surfaces. For example; pipes, radiators,
ranges, refrigerator enclosures.
4) KEEP CHILDREN AWAY. Do not let
visitors contact tool. All visitors should be
kept away from work area.
5) STORE IDLE TOOLS. When not in use,
tools should be stored in a dry, high or
locked-up place - out of reach of
children.
6) DON’T FORCE TOOL. It will do the job
better and safer at the rate for which it
was designed.
7) USE RIGHT TOOL. Don’t force small
tools or attachments to do the job of a
heavy duty tool. Don’t use tool for
purpose not intended-for example-don’t
use circular saw for cutting tree limbs or
logs.
8) WEAR PROPER APPAREL. No loose
clothing or jewelry to get caught in
moving parts. Rubber gloves and
nonskid footwear are recommended
when working outdoors. Wear protective
hair covering to contain tong hair.
9) USE SAFETY GLASSES with most tools.
Also use face or dust mask in dusty
environment.
10) SECURE WORK. Use clamps or a vise
to hold work. It’s safer than using your
hand and it frees both hands to operate
tool.
11} DON’T OVERREACH. Keep proper
footing and balance at all times.
12) MAINTAIN TOOLS WITH CARE. Keep
tools sharp at all times and clean for
best and safest performance. Follow
instructions for lubricating and changing
accessories. Keep handles dry, clean,
and free from oil and grease.
13) DISCONNECT TOOLS/BATTERIES.
When not in use, before servicing, and
when changing accessories, such as
bits.
14) REMOVE ADJUSTING KEYS AND
WRENCHES. Form a habit of checking
to see that keys and adjusting wrenches
are removed from tool before turning it
on.
15) AVOID ACCIDENTAL STARTING.
Don’t carry toot with finger on switch.
16) STAY ALERT. Watch what you are
doing. Use common sense. Do not
operate tool when you are tired.
17) CHECK DAMAGED PARTS. Before
further use of the tools, check guard or
other safety devices carefully to
determine that they will operate properly
and
perform their intended function.
Check for alignment of moving parts,
binding of moving parts, breakage of
parts, mounting, and any other
conditions that may affect its operation.
A guard or other part that is damaged
should be properly repaired or repiaced
by an authorized service center.
Have defective parts repiaced by an
authorized service center.
Do not use a defective tool.
SAVE THESE INSTRUCTIONS