Electrical connections, Wiring diagram – Panasonic CQ-DPX152 User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Electrical Connections

Caution:

• This product is designed to operate with a 12 V DC, negative ground battery system.

• To prevent damage to the unit, be sure to follow the connection diagram below.

• Remove approximately W' (5 mm) of protective covering from the ends of the leads before connecting.

• Do not insert the power connector into the unit until the wiring is completed.

• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables

and keep cable terminals free from touching any metal parts.

• Remember, if your car has a drive computer or a navigation computer, the data of its memory may be

erased when the battery terminals are disconnected.

Supplied hardware

No.

Item

Q’ty

©

Power connector

1

□ Wiring Diagram

gahOGp

0QIDBXÌ152U

Preamp output connector (rear) —

CQ-DPX152/OP102U(rear)

Antenna

É1

L (White)

R (Red)

Preamp output connector (front)

Power connector-

Ground lead

To a clean, bare metallic

part of car chassis.

Motor antenna

relay control lead

(To motor antenna)

(Max. 500 mA)

This load is not intended
for use with switch actuated
power antenna.

Note:

• The power antenna extends

automatically

when the

FM/AM radio mode is

selected.

5

■Fuse (15 A) ^

if the fuse (rear pane!) blows frequently, (hey may

be something wrong with the unit. Consult your

nearest Panasonic Servicenter for service.

(Black)

(Dark blue)

BAHERY

(Yellow)

15A

(Red)

ACC

(White/
black

stripe) (-)

(Dark blue/

white stripe)

Speaker lead

FRONT SP^ REAR SP

Battery lead

To the car battery, continuous +12 V DC

Power lead

To ACC power, +12VOC

Amp. relay control power lead

(Max. 500 mA)

This lead is for connection to the power
amplifier.

Note:

• This lead is used for power control

when an external power amplifier is
connected. The power supply of a
power amplifier will be activated when
turning on the power of this unit.

(White)

(Gray/black

stripe)

(-) (+)

(Gray)

(6reen/black^;ii^(Green)(Violet/black
stripe) [f 1 stripe)

(-) (-»-) (-) (+)

o o

(Violet)

Left speaker

(Front)

Right speaker

(Front)

Left speaker

(Rear)

Right speaker

(Rear)

28

GQ=DBXd527DPJ02U

Advertising