H normal play, Operation, Ri.n 1 – Panasonic SL-XP300 User Manual

Page 8: U \ u 9, I ^ : u u

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Operation

The following explanation is for a disc containing 7 tracks having a total playing time of 49

minutes and 58 seconds.

[H Normal play

(To play a disc from the first track to the end of the disc)

First, set the Play Mode Selector to “NORMAL" position. (The Play Mode Indicator has no dis-
play.)

•To listen through Stereo Earphones or

Headphones, adjust the phones level by

the phones level control of the unit.

•To listen through an audio system, adjust

the output level on the amplifier or re­
ceiver.

1. Insert a disc.

O Close the Cover

by hand.

@ Label must face

upward. .

O

Push the---------

Open Button.

8 cm size discs can
be used without
adaptor.

5. To stop disc play, press the Stop/

Operation Off Button.

•The disc will stop rotating, and the

total number of tracks and total play­

ing time will be displayed.

2. Release the hold state.

Functional buttons except for Open
Button cannot be activated in the hold

state.

•The Remote Controller on the Stereo

Earphones also has the Hold Switch.

• Before operation, be sure to release

the hold state of whichever (the unit or
the Remote Controller) you use.

3. Press the Play/Pause Button.

•The unit will be turned on and the disc

will be played from the first track.

m

o o

c o

*

i ^ : u u

I

Total Playing Time

) ri.n 1

U \ U 9

•When all tracks have been played, the

disc will automatically stop.

6. Press the Stop/Operation Off Button

again to turn the unit off.

•The unit will be turned off automatical­

ly after about 4 minutes in the stop

mode.

I

Playing Time per Track

Track Number

4. Adjust the volume.

First, turn down the level control of the
unit or the connected audio system.

Notes:

•Always press the Stop/Operation Off Button

before opening the disc holder to avoid
possible damage to disc and/or the disc

play mechanism.

•Set the unit to stop mode (Total Number of

Tracks and Total Playing Time are dis­

played) for Program Play, and be sure to

press the Stop/Operation Off Button after
the track number is displayed.

-8 -

Advertising