When mount the camera housing upside down, Specifications – Panasonic WV-7130D User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8, Wiring:
(1) Take off the rubber plate from the rear panel.
(2) Pass the connectors and power cables through
the sloted holes of the rubber plate.
(3) Complete the rubber plate.
(4} Replace the rubber plate.
Rubber Plate
Rear Panel
9. Adjust the camera direction.
10. Close the covers and tighten the attached cover
screws.
(1) At first, set the screws completely to the cover.
(2) Retighten the cover screws to close the cover.
WHEN MOUNT THE CAMERA HOUSING UPSIDE DOWN
1. Change the position of butterfly screws and guide pins.
CAUTION: When the Camera LED reflects on the
glass and it's light comes in the screen,
put the power Indicator Masking Label
(supplied) on the LED.
SPECIFICATIONS
Products Housed:
Mounting;
Ambient Operating Temperature:
Ambient Operating Humidity:
Dimensions:
Weight:
CCTV camera with various lenses
Rom top
Depending on the combination of camera and lens.
Less than 90'/.
Approx. 6-5/16'(W)
X
7-1 /16'(H)
X
20-11 /16'(D)
160(W}x180(H) X 525(D) mm
Approx. 7.5 lbs., 3.4 kg
-
3
-