4 power on your computer, 5 open the disc tray, 6 place a disc – Panasonic CF-VDD272 User Manual
Page 7: Removing a diso, 7 close the disc tray
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
4
Power on your computer
5
Open the disc tray
Press the eject button and slowly pull out the
tray.
6
Place a disc
Place the disc with the label facing upward in
the drive and push down until the center holder
clicks.
<Removing a diso
Place a finger on the center holder and lift
up on the edge of the disc.
7
Close the disc tray
Close the tray without touching the eject button.
Label side up
Eject Button
Center Holder
IDo not apply excessive force to the tray in the open position, doing so could damage
the tray.
I <Using PC Cards>
If the PC Card does not work, there may be no interrupt request (IRQ) line avail
able. Deactivate unnecessary equipment using in Setup Utility.