Special vcr features (continued), Vcr lock feature, Warning beeper feature – Panasonic OMNIVISION PV-8451 User Manual
Page 22: Special, Features, Continued)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Special
VCR
Features
(continued)
*lmportant: If the remote control POWER, ACTION, PROG, CHA/T, INDEX or ADD/DLT button does not
work when pressed, press the VCR button on the remote and try the button again.
[^^Check list before you begin.
□ All connections are made.
(See pages 6-9.)
□ VCR is plugged in,
□ TV is turned on and set to the VCR
channel (CH 3 or 4).
VCR Lock Feature
When activated, this feature prohibits all operations except for timer
recording and tape eject. This feature may be used to keep young children
from operating the VCR.
Hold down REC/TIME
on the VCR
without a cassette inserted
for 7
seconds
during Power On mode.
* “NO CASSETTE PLEASE INSERT A
CASSETTE" is displayed when REC^IME
is pressed. Please disregard this warning
and continue to hold down REC/TIME
for 7 seconds.
To Cancel the VCR Lock feature,
with or without a cassette inserted,
hold down REC/TIME on the
VCR for 7 seconds again while in
Stop mode.
VCR LOCK OFF
VCR Lock mode is cancelled automatically
after about 24 hours as long as the clock is set.
2
3
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound each time an
invalid entry or incomplete operation is made.
1
Press ACTION*
to display the
menu.
2
Press
AW
to select “SET UP
VCR,”
and then press
^ to
display the “SET UP VCR” screen.
Press
AT
to select “BEEPER,”
and then press
► to select “CN”
or “CFF."
4
Press ACTION twice
to exit this
screen.
MENU
SET UP FEATURE
SET CLOCK
SET UP CHANNEL
ID I ОМА/ LANGUE; ENCL1 SK
SELECT;A T KEY
SET ;► KEY
END : ACT ION KEY
------------SET UP VCR-------------------
REPEAT PLAY
; ON
: ON
NOISY CH BLUE BACK; ON
SELECT;* ▼ KEY
SET ;► KEY
END ;ACTION KEY
22