Pilot USA PA-1161 - Manual

1
PA-1161
Owner’s Manual
“Durable and Dependable”
This headset is one of the results of over 25 years of experience manufacturing
aviation headsets. In 25 years, one talks to a great number of pilots from all
walks of life and from many segments of the aviation community. We believe this
headset to be perfect for the entry level pilot, backseats, or a pilot on a budget.
Features
Passive Noise Reduction: (NRR) 24dB Dual Volume Controls
Half Metal/Half Flex Mic Boom
Noise Canceling Electret Microphone
Mono/Stereo Capability Foam Headpad
Foam Ear Seals
Three Year Warranty
Table of Contents
Introduction 1.0
Features 1.1
Fitting Your Headset 1.2
Microphone Placement 1.3
Volume Controls 2.0
Mono / Stereo Selector 2.1
Foam Ear Seals 2.2
Multi-Cushioned Foam Headpad 2.3
Taking Care of Your Headset 2.4
1.2 Fitting Your Headset
Wearing your headset properly is paramount to achieving both comfort and maximum
performance. First slightly loosen the hand adjustable knobs on the headband. The
headset should be placed on your head and slowly pulled down so that the ear cups are
properly positioned over each ear for maximum noise attenuation. Tighten the knurled
knobs when the headset feels correct. It should apply slight pressure on your head
without being snug. You may need to make your final adjustments in the high noise
environment of the cockpit.
1.3 Microphone Placement
Your headset comes with a half metal/half flex microphone boom and a noise canceling
electret microphone. The boom can be rotated 360 degrees for left or right side use.
Proper placement of the microphone is critical in order to achieve clear communications.
The microphone should be positioned at the corner of your mouth approximately ¼”
away from your lips.