Pilot USA SC-H40A User Manual

Page 2

Advertising
background image

2

2.0 Microphone Placement

Your headset comes with a metal/swivel microphone boom and a noise canceling
electret microphone. The boom can be rotated 360 degrees for left or right side use.
Proper placement of the electret microphone is critical in order to achieve clear
communications. The microphone should be placed at the corner of the mouth
approximately ¼’’ away from the lips.

2.1 Volume Control

The SC-H40A is fitted with a volume control on the left ear cup.

2.2 Taking Care of Your Headset

To insure the full life of your headset, keep it clean and free of dust and dirt. Clean your
headsets with non-alcohol wipes or a soft cloth dampened with water and a mild soap.
Never use alcohol. Plastic parts dry out or fray when exposed to alcohol based products.
Headband, ear cups, ear seals and cords can be lightly cleaned but one should be
careful around the microphone and speakers on the headset.

A.

Mic Windscreen

: PILOT recommends periodically replacing the microphone

windscreen if necessary. The foam microphone windscreen helps eliminates the
popping “P”s and “T”s and annoying breath puffs when you’re communicating
with the headset. The foam microphone windscreen also helps protect the
microphone from moisture and other elements that may cause damage to the
electronics.

B.

Ear Cushions:

Ear seals also need periodic replacing. Depending on how much

you fly, temperature (extreme heat or cold) also influences the life span of your
ear seals. We have several types of ear seals on our headsets. Generally PVC,
foam and silicone gel style ear seals can be wiped off with mild soap and water.
Do not submerge the ear seals in water. All three types of ear seals have vent
holes and water would enter the ear seal’s vent holes thus ruining the ear seal.

C.

Communication Cord:

Take care of your communication cord. Wires in the cord

can break if abused. Always disconnect them by disconnecting the plugs, not by
pulling the cords. Pulling on the cord instead of the plugs is a major cause of
headset repairs – it causes wire breaks and static.

Pilot Communications USA

70 Maxwell

Irvine, CA 92618

Toll Free: 1-888-GO-PILOT Tel: 949-748-8880 Fax: 949-748-8881

Advertising