Seymour Midwest Twist Bracing(PK90331) User Manual

Twist brace, Assembly instructions, Replacement parts list

Advertising
background image

Twist Brace

Assembly Instructions

Tools Needed for Assembly

- 7/16” wrench (two)

Parts Shipped with Unit:

- Head with riveted twist braces
- Bolt bag for brace
- Aluminum handle with cap (not shown)

Assembly Instructions for Handle:

1. Slide slotted end of handle over center hole on aluminum head.
2. Align holes and insert shorter bolt. Do not tighten until all

hardware is in place.

Twist Brace Instructions:
1. Rotate ends of braces out to handle. Align holes of

braces with the handle as shown, and insert the longer bolt.

2. Start both loc nuts on bolts. Use wrenches to tighten, being

careful not to over tighten. Over tightening may result in crushing
the handle, thereby compromising its strength.

Mailing Address:

Shipping Address:

PO Box 1674

2666 S Country Club Rd

Warsaw, IN 46581-1674

Warsaw, IN 46580

REPLACEMENT PARTS LIST

See Reverse Side

PK90331
01/21/15

FULL WARRANTY

All

Seymour Midwest products carry a full warranty against manufacturer defects in quality and workmanship.

Products which have been abused or worn out from normal use are excluded from this warranty.

We reserve the right to replace or issue credit on an individual basis.

Phone: 8

44-SEYMOUR

FAX: 574-267-8508

��

www.

seymourmidwest.com

Advertising