Softride 26428 Alumina 3 bike rack (Lightest) - Manual

ALUMINA 3 RACK INSTRUCTIONS
Model #26428
Important This bike rack is designed for use in a 2” or 1.25” receiver and designed to hold a maximum of three bikes. Do not
use this rack for anything other than carrying bicycles. Do not exceed your vehicle’s receiver load ratings for any
reason. Reference the instruction manual for proper use of this rack. 90 lb maximum carrying capacity. Save these
instructions.
Warning Check the tightness of bolts and nuts periodically as they may loosen slightly during normal use.
DO NOT drive the vehicle with the bike rack in the lowered position.
This rack CANNOT be used on a Class 1 (200 lb tongue weight) receiver hitch.
Not intended for off-road use.
This rack MUST be removed from the vehicle before going through a car wash.
PARTS INCLUDED TOOLS REQUIRED
(A) Main rack assembly with Cable Lock
(B) Bike rack arms (2)
(C) Arm straps (9)
(D) Hitch bolt with lock washer (5/8” for 2” rack & 1/2” for 1.25” rack)
(E) Soft wraps (3)
(F) Detent pins (2)
(G) 1.25” Hitch Bar
(H) Lock & Keys
(I) Anti-sway (3)
(J) Hitch Bar Nut Holder
Torque wrench
Screw driver
(D)
(A)
(J)
(E) (C)
(I)
(G)
(H)
(F)
(B)