MagnaFlow CHEVROLET CAMARO Stainless Cat-Back System PERFORMANCE EXHAUST - Manual

Step 1: Begin removing your OEM exhaust system by
first loosening the clamps attaching the x-pipe
assembly at the outlet of the catalytic converters.
These front clamps will be re-used. Working front to
rear detach all hangers from the rubber insulators.
Retain the insulators as they will be used to install
your new exhaust system. Remove the system from
the vehicle.
Step 2: Use the OEM clamps to attach the Tru-X
Assembly to the catalytic converters. Next attach the
D/S and P/S Mid Pipes to the Tru-X Assembly and
secure with the supplied clamps. Attach the Muffler
Assemblies to the Mid Pipes and secure with the
supplied clamps. Locate all hangers into existing
rubber insulators.
Step 3: With all components mounted loosely, adjust
the system for overall aesthetics and clearance of
frame & bodywork. (MAGNAFLOW recommends at
least 1/2" of clearance between the exhaust system
and any body panels to prevent heat-related body
damage or fire.)
Step 4: Once a final position has been chosen for the
new system, evenly tighten all fasteners from front to
rear. The supplied band clamps must be VERY tight
to properly align the pipes and prevent leaks
(Approximately 40ft-lbs). U-bolt clamps should be
tightened to approximately 30-35ft-lbs. Inspect all
fasteners after 25-50 miles of operation and retighten
if necessary.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
15053
2012 Chevrolet Camero 6.2L S/C ZL1
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
09/25/12
Rev: 000
MUFFFLER ASSY
P/S
MUFFFLER ASSY
D/S
MID PIPE D/S
MID PIPE P/S
TRU-X ASSY.
4X 3.0" CLAMPS