MagnaFlow JEEP TRUCK WRANGLER JK Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

Step 1, Step 2, Step 3

Advertising
background image

Step 1:

(Carefully read all instructions before

installation)

To remove the OEM exhaust system,

unbolt the clamps at the inlet and over-axle pipe,
disengage the welded hangers from the rubber
isolators and remove the components. You may
need to temporarily remove the transmission
skidplate to aid in removal and installation.

Step 2:

Begin installation of the new system by

fitting the new Resonator Assembly to the catalytic
converter, fitting the hanger into the rubber isolator,
and by fastening it with a supplied 2.50" clamp. Be
sure to fit the alignment peg in the large notch and to
leave the clamp loose for final adjustment of the
complete system. Install the Mid-Pipe and Muffler
Assemblies in the same fashion.

Step 3:

With all components mounted loosely,

adjust the system for overall aesthetics and
clearance of frame & bodywork. (MAGNAFLOW
recommends at least 1/2" of clearance between the
exhaust system and any body panels to prevent
heat-related body damage or fire.)

Step 4:

Once a final position has been chosen for

the new system, evenly tighten all fasteners from
front to rear. The supplied band clamps must be
VERY tight to properly align the pipes and prevent
leaks (Approximately 40ft-lbs). U-bolt clamps should
be tightened to approximately 30-35ft-lbs. Inspect all
fasteners after 25-50 miles of operation and
retighten if necessary.

Mufflers, Converters,

Systems and Tips

INSTALLATION INSTRUCTIONS

15115

2012 Jeep Wrangler 3.6L Catback System

Warning

:

When working on, under, or around

any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.

** Magnaflow Performance Exhaust recommends professional
installation on all their products

Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688

Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500

08/24/11

RESONATOR
ASSY

MID-PIPE
ASSY

MUFFLER
ASSY

[3] 2.50"
CLAMPS

Advertising