MagnaFlow FORD TRUCK EXPLORER Stainless Cat-Back System PERFORMANCE EXHAUST - Manual

Step 1: Begin removing your OEM exhaust by first
loosening the clamps attaching the assembly at the
outlets of the catalytic converter. Working front to
rear detach all hangers from the rubber insulators.
Retain the insulators as they will be used to install
your new exhaust system. Remove the system from
the vehicle.
Step 2: Install your new MAGNAFLOW system by
first attaching the Resonator Assembly to the catalytic
converter outlets using the Supplied 2.25" clamps
and attaching the hanger. Slip the Extension Pipes
into the Resonator Assembly and secure using the
supplied 2.50" clamps and loosley fasten together at
the bracket location with the supplied fasteners (P/S
bracket must be on the rear side of the vehicle when
mated to the driver side bracket). Finish by installing
the Muffler Assemblies in a similar fashion. Locate all
hangers into the rubber insulators.
Step 3: With all components mounted loosely, adjust
the system for overall aesthetics and clearance of
frame & bodywork. (MAGNAFLOW recommends at
least 1/2" of clearance between the exhaust system
and any body panels to prevent heat-related body
damage or fire.)
Step 4: Once a final position has been chosen for the
new system, evenly tighten all fasteners from front to
rear. The supplied band clamps must be VERY tight
to properly align the pipes and prevent leaks
(Approximately 40ft-lbs). Inspect all fasteners after
25-50 miles of operation and retighten if necessary.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
15218
2013 Ford Explorer 3.5L
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
01/02/13
Rev: 000
Resonator
Assy
D/S Extension Pipe
Assy
P/S Extension Pipe
Assy
D/S Muffler
Assy
P/S Muffler
Assy
[4] 2.50"
Clamps
[2] 2.25"
Clamps