MagnaFlow LAND ROVER TRUCK RANGE ROVER SPORT Stainless Cat-Back System PERFORMANCE EXHAUST User Manual

MagnaFlow For the car

Advertising
background image

Step 1: Carefully read all instructions before
installation

Step 2: Unbolt the flange and loosen the clamp on
the inlet pipes at the catalytic converter of the OEM
system. Working front to rear carefully remove the
rest of the system making sure to retain the
mounting hardware and rubber insulators as they
will be needed to install your new MAGNAFLOW
systen

Step 3: Use the supplied 2.25" U-Bolt assembly,
nuts and bolts to secure the muffler assembly to the
catalytic converter. Slip the outlet pipes over the
muffler assembly outlet pipes and attach using the
supplied 2.5" clamps. Attach both tail pipe
assemblies and attach using supplied clamps.
Working front to rear, locate each hanger to the
existing rubber insulator locations.

Step 3: With all components mounted loosely,
adjust the system for overall aesthetics and
clearance of frame & bodywork. (MAGNAFLOW
recommends at least 1/2" of clearance between the
exhaust system and any body panels to prevent
heat-related body damage or fire.)

Step 4: Once a final position has been chosen for
the new system, evenly tighten all fasteners from
front to rear. The supplied band clamps must be
VERY tight to properly align the pipes and prevent
leaks (Approximately 40ft-lbs). U-bolt clamps
should be tightened to approximately 30-35ft-lbs.
Inspect all fasteners after 25-50 miles of operation
and retighten if necessary.

Mufflers, Converters,

Systems and Tips

INSTALLATION INSTRUCTIONS

15579

2010 Land Rover Range Rover Sport 5.0L V8

Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.

** Magnaflow Performance Exhaust recommends professional
installation on all their products

Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688

Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500

Mar 15, 2012
Rev: 000

2.25" U-Bolt Clamp Assy

Muffler Sub Assy

4x 2.50" Clamps

D/S Mid Pipe Assy

P/S Mid Pipe

D/S Tail Pipe Assy

P/S Tail Pipe Assy

Advertising