MagnaFlow NISSAN TRUCK FRONTIER Stainless Cat-Back System PERFORMANCE EXHAUST - Manual

Step 1:(Carefully read all instructions before
installation) Begin removing the OEM exhaust
system by first unbolting the inlet flanges at both
catalytic converter outlets. Remove all welded
hangers from the rubber isolators. The exhaust
can now be removed in one piece. Be sure not to
damage and retain all mounting hardware and
rubber isolators as they will be needed to install
your new MAGNAFLOW exhaust system.
Step 2: Begin the insallation process by first
bolting the inlet flanges of both inlet pipes to the
outlet flanges of the catalytic converters. Next,
slip the inlets of the muffler assembly over the
outlet ends of both inlet pipes. Loosely secure
using the supplied clamps. Attach the tail pipe
assembly and secure in a similar fashion.
Step 3: With all components mounted loosely,
adjust the system for overall aesthetics and
clearance of frame & bodywork. (MAGNAFLOW
recommends at least 1/2" of clearance between
the exhaust system and any body panels to
prevent heat-related body damage or fire.)
Step 4: Once a final position has been chosen for
the new system, evenly tighten all fasteners from
front to rear. The supplied band clamps must be
VERY tight to properly align the pipes and prevent
leaks (Approximately 40ft-lbs). U-bolt clamps
should be tightened to approximately 30-35ft-lbs.
Inspect all fasteners after 25-50 miles of operation
and retighten if necessary.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
15580
2010 Nissan Frontier 4.0L EC/SB
Warning: When working on, under, or around
any vehicle exercise caution. Please allow the
vehicle's exhaust system to cool before removal,
as exhaust system temperatures may cause
severe burns. If working without a lift, always
consult vehicle manual for correct lifting
specifications. Always wear safety glasses and
ensure a safe work area. Serious injury or death
could occur if safety measures are not followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500
Dec 15, 2010
Rev: 000
Inlet Pipe Assy. D/S
Inlet Pipe Assy. P/S
Muffler Assy.
Tail Pipe Assy.
2x 2.25" Clamps
3.00" Clamp