Coleman 9992-644 - Manual (Page 12)

Grill Assembly — 8200 Series
Side Burner Installation
(continued)
Fig. 18 6. From underneath the side shelf, slide the valve stem through the
hole in the front of the shelf (Fig. 18).
Fig. 19 7. Insert two mounting screws through the bezel and into the side
burner valve and tighten. Make sure the bezel is installed
correctly with the “OFF” designation at the top (Fig. 19).
Fig. 20 8. Press the side burner assembly into the side burner tray and
install two self tapping screws (Fig. 20).
Fig. 21 9. Remove the igniter button and plastic hex nut from the electrode
module (Fig. 21).
Fig. 17
5. With a Phillips head screwdriver, remove both mounting screws
from the front of the valve assembly (Fig. 17).
12