Combi Baby Carrier - Manual (Page 2)

Place the assembled spring into the
screw hole.
Step 4: Attach Spring
6b.
6a.
5a.
5b.
Using the slotted end of wrench
tool provided, push hook and
insert directly above current
spring onto metal bracket as
shown in figure 6b.
-2-
Left Side
Left Side
Right Side
Right Side
CAUTION: Tighten the screw until
it is snug. Do not over-tighten.
CAUTION: Make sure the hook
is attached to the bracket and
NOT attached to the spring.
*See following page for correct
and incorrect placement.