MagnaFlow JEEP TRUCK LIBERTY Stainless Cat-Back System PERFORMANCE EXHAUST - Manual

Step 1: First un-bolt the OEM exhaust from the
catalytic converter at the clamp junction. You
can now disengage the welded hangers from
the rubber insulators and remove the exhaust
system from the vehicle. Do not damage the
OEM rubber insulators, as they will be reused to
mount the new system.
Step 2: Install the Resonator Assembly to the
Catalytic Converter outlet pipe using the
supplied 2.50" clamp. Leave all clamps loose for
final adjustment of the complete system. Install
the Muffler Assembly in a similar fashion using
the supplied 2.50" clamp and by fitting the
welded hangers into the rubber insulators.
Step 3: With all components mounted loosely,
adjust the system for overall aesthetics and
clearance of frame & bodywork. (MAGNAFLOW
recommends at least 1/2" of clearance between
the exhaust system and any body panels to
prevent heat-related body damage or fire.)
Step 4: Once a final position has been chosen
for the new system, evenly tighten all fasteners
from front to rear. The supplied band clamps
must be VERY tight to properly align the pipes
and prevent leaks (Approximately 40ft-lbs).
U-bolt clamps should be tightened to
approximately 30-35ft-lbs. Inspect all fasteners
after 25-50 miles of operation and retighten if
necessary.
Mufflers, Converters,
Systems and Tips
INSTALLATION INSTRUCTIONS
16874
2008-2011 Jeep Liberty 3.7L
Warning : When working on, under, or around any
vehicle exercise caution. Please allow the vehicle's
exhaust system to cool before removal, as exhaust
system temperatures may cause severe burns. If
working without a lift, always consult vehicle manual
for correct lifting specifications. Always wear safety
glasses and ensure a safe work area. Serious injury
or death could occur if safety measures are not
followed.
** Magnaflow Performance Exhaust recommends professional
installation on all their products
Magnaflow Performance Exhaust - 22961 Arroyo Vista Rancho Santa Margarita, CA 92688
Main #: 1-800-990-0905 Technical Support: 1-800-959-9226 ext 4500 06/03/11
Reson Assy
Muffler Assy
[2] 2.50" Clamps