ConnectPRO MIT-CAT5 8 - Manual (Page 23)

To change the OSD settings you must press or choose Write Configuration
from the File menu after making changes. The changes will then be sent to the CAT5 KVM
Manager, and the OSD will reflect these changes.
Renaming a computer
To rename a computer:
1. Type the new name in the box below the computer icon.
2. Click to send the new name to the CAT5 KVM system.
Or click SaveSaveAs from the File menu to save the change in a file and not alter the OSD names.
The Edit menu
You can edit all OSD fields. Edit the following from the Edit menu.
• Logo
• Passwords
• Settings
Logo and Passwords
You can edit the logo that appears at the top of the OSD window. You can also edit the names and
passwords for the Administrator, Supervisor and 6 Users.
1. Edit the Logo and Passwords by choosing them from the Edit menu. See figures below.
Figure 19 The logo
Figure 20 The names and passwords
2. Make the desired changes.
3. Click OK.
Settings
Choose Settings from the Edit menu. The Computers’ Properties box appears. See Figure 21.