360 Systems Image Server 2000 - Manual (Page 68)

Page 68 Image Server 2000 Owner’s Manual
Using Channel Ganging
Transport operations on Video Channels can be locked or “ganged” together to allow frame-
accurate key and fill material (either stills or clips) to be implemented. Channel Ganging might also
be used to create certain types of presentations, such as synchronized matte backdrops on News
Broadcasts.
The channels can be ganged in the following combinations:
1. Channel 1 controls Channel 2
2. Channel 1 controls Channels 2 and 3
3. Channel 2 controls Channel 3
To configure Channel Ganging Click EDIT->CONFIGURE->TIMING from the Main Menu. The
screen of Figure 25 is displayed.
To select Channel 1 to be ganged with channel 2 only, set CHANNEL GANGING MASTER to 1
and click the GANG checkbox on channel 2.
To select Channel 1 to be ganged with channel 3 only, set CHANNEL GANGING MASTER to 1
and click the GANG checkbox on channel 3.
To select Channel 1 to be ganged with channel 2 and 3, set CHANNEL GANGING MASTER to 1
and click the GANG checkboxes on channel 2 and channel 3.
To select Channel 2 to control channel 3 set CHANNEL GANGING MASTER to 2 and click the
GANG checkbox on channel 3.
Figure 25 - Timing Configuration Screen