360 Systems Instant Replay 2 - Manual (Page 40)

40
CHAPTER 6 – MACHINE SETUP MENU’S
Default values are UNDERLINED. All settings are saved on disk and restored on power up.
EDIT Menu
Menu Item Values
Adjust Head Point 0.00
Adjust Tail Point end of file
Set Fade In Length Range is 0.00 to 40.00
Set Fade Out Length Range is 0.00 to 40.00
Set Tail Pre-roll Variable from 1 to 9 seconds. Default is 5 sec.
Adjust Output Gain Range is +6 to – 90 dB. Default is 0dB
Refer to the section, “Editing Cuts” on page 22 for more information about these settings.
RECORD SETUP
Menu Item Values
Audio Input ANALOG, AES/EBU XLR-3, AES/SMPTE-75 OHM RCA,
IEC-958 TYPE II RCA
Threshold (in dB) OFF, -6, -12, -18, -24, -30, -36, -42, -48, -54, -60
Record Overwrite OFF, ON
Record Time Limit NONE, 60 MIN, 30 MIN, 5 MIN
Record/Erase Lockout OFF, ON
Recording Format 44.1K WAV 16 Bit, 48K WAV 24 Bit, 44.1K WAV 16
Bit, 48K WAV 16 Bit, 44.1K DC2, 48K DC2
Dig Input Processing OFF, Dither 24-> 16 Bit, Sample Rate Convert, Dither
24-> 16 Bit + SRC
Prompt for Head/Tail Enabled, Disabled
Refer to the section, “Recording A Cut” on Page 13 for more information about these settings.
NETWORKING Menu
Menu Item Values
FTP Enable ENABLE, DISABLE
FTP User 360USER
FTP Password PASSWORD
Subnet Mask 255.255.255.0
IP Address 192.168.1.100
DHCP Enable ON, OFF
OPERATIONS Menu
Menu Item Function
Change Cut Name Changes name of currently selected Cut
Erase Erases currently selected Cut
Move Cut Move currently selected Cut to any unused Index
number
Change Bank Name Changes name of currently selected Bank