Adaptive Technologies AJ-2336 User Manual
Afgs series, Afgs adjustable grid
© 2006 ATM FLY-WARE Signal Hill, CA 90755 USA (562) 424-1100
06/06
AFGS SERIES
AFGS ADJUSTABLE GRID
Installation Instructions for AFGS-30G, 46G and 66G (White)
Thank you for choosing the AFGS adjustable Grid. The AFGS
adjustable Grid is a universal grid for suspending loudspeakers in a
circular array configuration. Used with the AFGS spokes and
suspension arm series, it suspends a speaker and provides horizontal
angle adjustability. The AFGS Grid also provides suspension points for
four point or two point using a bridle to the main structure.
Important: Rigging overhead system requires professional experience.
Improperly installed equipment can result in property damage,
personal injury, death and/or liability to the installing contractor.
Do not suspend if in doubt about the integrity of the structure.
Caution: Due to the wide variety of structures, environments, materials
and rigging methods, these instructions assume that the installing
contractor will exercise good judgment in selecting the proper mounting
area and hardware.
Follow these instructions for the most efficient and safest
mounting results.
Do not exceed the working load limit.
Package Contents:
1 pc.
AFGS Grid
1 pc.
Instruction sheet
Step 1. Check to make sure that you have the right grid for the
application (AFGS-30G or AFGS-46G or AFGS-66G)
Step 2. Install AFGS Spoke to Grid:
Refer to the AFGS Spoke Series instruction sheet (Figure 1).
Step 3. Install AFGS Suspension Arm:
Refer to the AFGS suspension arm Series Instruction sheet
(Figure 2).
Step 4. Suspend the AFGS grid:
Attached the selected load rated suspension hardware to the pad
eyes of the grid. The grid can be suspended from four points on
from a two points using a bridle (See main picture).
Step 5.
Lift up the grid with speaker attached then finalized all horizontal
angles, tilt angle then tighten any bolts and nuts permanently.
Step 6.
Check all connections and hardware before hoisting the cluster.
Figure 1: Spoke Attachment
Figure 2: Suspension Arm Attachment