Adaptive Technologies MM-008-BT - Manual

©2004 Allen Products Co., Inc. Signal Hill, CA 90755
(562) 424-1100 10/04-rev01
Figure 1
Figure 2A: Horizontal speaker
adapter plate installation
MultiMount
™
MM-008
Universal Wall and Ceiling Mount Installation Instructions
Thank you for selecting the all weather MultiMount™ MM-008 speaker
mounting kit. This mounting kit contains two speaker mounts that
independently aim and tilt speakers weighing up to 15 lbs/6.8 kg from
most wall and ceiling structures. The MM-008 accommodates speakers
with both single and two hole mounting patterns.
Warning:
Mounting and/or rigging loudspeakers requires experienced
professionals. Improperly installed loudspeakers can result in
property damage, personal injury or liability to the installing
contractor.
To assure a trouble free installation, read through and follow these
instructions carefully before beginning. If you have doubts about the
integrity of the structure you are mounting to or you are not sure about
the proper hardware to use, consult a structural and/or hardware
specialist.
Be sure that all of the following items are included in this kit before proceeding:
Package Contents:
Item #: Qty Description
1. 2 pcs. Surface mounting plate
2. 2 pcs. Support arm
3. 2 pcs. Speaker adapter plate
4. 2 pcs. U shaped rotator bracket
5. 2 pcs. Snap-on cover plate
6. 2 pc. Hardware kit (for two sets)
Note to installing contractor:
Due to the wide variety of wall and ceiling structures, materials and mounting methods,
these instructions assume that the installer will exercise good judgment in selecting the
proper mounting area and hardware.
As a guide, the installation, when complete should be capable of supporting 5 to 10 times
the actual applied load. We recommend the use of a safety cable (sold separately).
Step 1. Install Mounting Plate:
(a) For wall mounting:
Insert the rubber grommet into the larger
hole of the mounting plate with the radius
edge toward the outside. Install the
mounting plate to the wall with the rubber
grommet facing towards the ceiling using
the appropriate hardware for the
application (Figure 1). If in doubt, consult
a local hardware specialist.
(b) For ceiling mounting:
Predetermine the desired direction of the
speaker then install the mounting plate
with the rubber grommet facing the
direction of the speaker. Use the appropriate hardware for a ceiling mounted application (Figure 1).
Figure 2B: Vertical speaker adapter plate
installation