A-Designs REDDI - Manual (Page 6)

6 | REDDI ™ Owner’s Manual
Functions
Front
1
Input (IN) - Combo jack XLR/1/4 inch phono
2
Output (OUT) - Male XLR
3
Thru Jack* (THRU) - 1/4 inch
*NOTE: The Thru Jack is to allow you to connect your guitar/bass/keyboards to the input of your amplifier. This
will let you mic your amp and go direct to the A/D/DAW/Desk/board etc.
Do NOT plug direct from the main outs of ANY amplifier to your REDDI. This will damage the unit and costly
repairs will follow.
4
Level Control (LEVEL)- Level control knob is just that. It will control the level/volume/pad of the outgoing signal.
5
Front Cover - Overlaps to provide protection to switches.
6
Heat Vents - Allow the flow and circulation of air to cool the tubes and transformers. Located on both sides, front
and back.