ALFA NETWORK AWAP411 - Manual (Page 2)

1
1) First, connect the power adapter of the AP to a wall outlet or power strip. The
POWER LED will light to indicate proper operation.
2) Secondly, connect the LAN port of the AP to a switch/router/modem by an
Ethernet cable. The LAN LED will light to indicate a proper Ethernet connection.
Tips: The LAN Port on the AP is Auto MDI/MDIX, so you can use a straight-
through or crossover cable to the LAN Port.
3) Now with default settings, your wireless adapter will connect to the AP
automatically.
Receptor for
Power Adapter LAN Port