Cooper Lighting ACT955RMMH - Manual

DESCRIPTION Catalog # Type
Project
Comments Date
Prepared by
www.cooperlighting.com
SPECIFICATION FEATURES
A ...Housing
White housing with structural steel arm
and wireway. Connected to integral j-box.
B ...System Protection:
Thermal protection provided to guard
against overheating and misuse of
insulation over and around fixture.
Vent holes in housing provide cooler
operation.
C ...Electrical
Integral j-box and electronic metal halide
ballast. 120V/277V input. Junction box
is U.L. listed for through branch wiring.
Includes five 1/2 trade size knockouts.
D ...Lamp
MR16 style metal halide lamp. (not included)
GX10 twist-and-lock lamp socket included.
E ...Mounting
Supplied with 3 (three) spring loaded
mounting clips. May accomodate 1/2”,
1”, or 1-1/2” ceiling thickness. Includes
adjustable leveling screw.
Ceiling Cut-Out: 4.18”
ACCURUS
ACT955RMMH
Remodel Housing
for 5” Square Trim
FOR METAL HALIDE MR16
20W or 39W
ORDERING INFORMATION
Housing
ACT955RMMH =
Accurus Remodel Housing
for Square Trim
w/ Integral Metal Halide Ballast
Voltage
120
= 120 volts primary
277 = 277 volts primary*
*Consult factory for 277V ballast availability.
Remodel housing for Accurus square trims. Includes electronic metal
halide ballast for use with 20W or 39W MR16 Metal Halide lamp.
For remodel applications. Insulation must be kept 3” from all sides and at
least 1” above the housing.
Specifications and Dimensions subject to change without notice.
RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349- 3031
Ballast Wattage
20
= 20 watts
39 = 39 watts
ACT955RMMH
rev 122007
11.25”
3.28”
5.00”
4.18”
J-box with integral
electronic metal
halide ballast