Analogue Solutions Cranial Saw - Manual (Page 3)

cranial saw
modules
medic
dual vco / sub
TUNE DETUNE PW1 BOTH VCO2 PW2 VCO1 VCO2 SUB
PW PW VCO1 VCO2 MIX PITCH MOD
MOD
CV
CV
OUT OUT
GLIDE
FREERUN
1+2 VCO
SYNC
WAVE WAVE
MODULATION PITCH OUTPUT MIXER
VCO2
VCO1 VCO1 VCO2 CV
OUT
+ +
VCO2 =
Cross Modulation Patch.
Patch the audio out of VCO1 to VCO2 CV so that VCO2 pitch is modulated by VCO1's audio.
The intensity of the effect is changed using the VCO2 Modulation slider. Play around with
levels, relative pitches, etc to hear the range of sounds. It works best if you have continually
changing relative pitches. This can in part be achieve using the FREERUN toggle switch or
disconnecting VCO1 from the GLIDE circuit.