Aquafx installation instructions – AquaFX The AquaFX Blue Marlin 1000 Gallon Per Day Reverse Osmosis User Manual

Page 2

Advertising
background image

© 2014

AQUAFX INSTALLATION INSTRUCTIONS

Congratulations on your new AquaFX water treatment system from Aqua Engineering & Equipment, Inc. We hope your

system brings you and your pets many years of service and fresh clean water. There are a few basic steps we wanted

to inform you about when it comes to the installation and maintenance of your water treatment system. If you should

have any difficulties or questions, do not hesitate to contact us and we will be happy to help you any way we can.

Strongly Recommend to hook your Commercial RO unit to a softened water supply.


Your system was built to order, and it is ready to hook up to a water supply with the appropriate adapters included.

AquaFX, Inc. pressure tests all systems prior to shipping, so your RO membrane will be installed, The only other work

you need to complete is hooking the unit up to a supply and drain line.

1) Unpack your unit completely.
2) Inspect for any damage or broken parts as a result of shipping.
3) Locate and connect the supply side of the equipment. The center Port will be plugged, the

side port is ready for the supply tube, the Black 3/8” tubing.

4) Then connect your specified adaptor, if it has not already been done.


5) Locate and connect the

drain line to the other end of the membrane housing, there is a ball valve (flow

restrictor) installed. The correct port for the drain is the port to the side, not the center port.

Place the other end in an appropriate area to accept drain water.

6) Now connect the

BLUE

product water line by inserting the white tube insert into the blue tube.

Now using the nut, attach that end to the ASO

to only port is available, tighten nut. Take the other end

of blue tube and insert it into the remaining open port on the membrane housing.
Center port

7) Now allow the system to run for approximately 15 minutes to flush completely. Please check systems for

leaks, parts can come lose during shipping!

These instructions cover the most common set up configurations. If you ordered different colored tubing or filter

cartridge housings, you may not be able to follow these instructions completely. All AquaFX systems come with a 3

year limited warranty. Please contact us if you have problems with your unit. Customer is responsible for filter and

membrane changes and associated costs. AquaFX carries a complete line of parts and accessories for all of our

systems. Thank you for your business!

Advertising