Compaq V6500 - Manual (Page 68)

7 . Remove the eight Phillips PM2.5×7.0 screws that secure the display bezel to the display assembly.
8 . Flex the inside edges of the left and right sides (1) and the top and bottom sides (2) of the display
bezel until the bezel disengages from the display enclosure.
9 . Remove the display bezel (3). The display bezels are available using spare part numbers
433283-001 and 453328-001 for models with Intel processors, and 433284-002 for full-featured
models with AMD processors.
10 . If it is necessary to replace the display inverter, remove the inverter (1) from the display enclosure
as far as the display panel cable and the backlight cable allow.
60 Chapter 4 Removal and replacement procedures