Hard drive – Compaq V6500 User Manual
Page 50
Hard drive
NOTE:
All hard drive spare part kits include a hard drive bracket.
Description
Spare part number
250-GB, 5400-rpm
453775-001
200-GB, 4200-rpm
451863-001
160-GB, 5400-rpm
451862-001
120-GB, 5400-rpm
446498-001
80-GB, 5400-rpm
446497-001
60-GB, 5400-rpm
446496-001
Before removing the hard drive, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
).
Remove the hard drive:
1
.
Loosen the two Phillips PM2.0×5.0 screws (1) that secure the hard drive cover to the computer.
2
.
Lift the right side of the hard drive cover (2), swing it to left, and remove the cover.
3
.
Remove the hard drive cover.
NOTE:
The hard drive cover is included in the Plastics Kit, spare part number 438669-001.
42 Chapter 4 Removal and replacement procedures