Optical drive – Compaq V6500 User Manual
Page 58
Optical drive
NOTE:
All optical drive spare part kits include an optical drive bezel.
Description
Spare part number
For use in computer models with Intel processors:
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
446505-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
446504-001
DVD/CD-RW Combo Drive
446503-001
For use in computer models with AMD processors:
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive
449934-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
449936-001
DVD/CD-RW Combo Drive
455076-001
Before removing the optical drive, follow these steps:
1
.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2
.
Disconnect all external devices connected to the computer.
3
.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4
.
Remove the battery (see
).
Remove the optical drive:
1
.
Position the computer with right side toward you.
2
.
Remove the Phillips PM2.5×7.0 screw (1) that secures the optical drive to the computer.
3
.
Insert a thin tool, such as a paper clip (2), into the disc tray release access. (The optical drive disc
tray is partially ejected from the optical drive.)
4
.
Use the disc tray frame to slide the optical drive (3) out of the computer.
50 Chapter 4 Removal and replacement procedures