Meters – Audio Damage Panstation User Manual
Page 16
Advertising
Meters
Panstation has several horizontal level meters at the top of its window. From top to bottom, these meters
display the level of the input signals, the gain of the channels as set by the LFOs, and the level of the output
signals. The meters indicate higher levels as they move outwards from the center.
When the Audio Trigger Source is active, the top meter has a pair of marks indicating the setting of the Trig
Threshold control. In the following screenshot, the input signal has an amplitude of -4dB on both channels,
and the LFOs have panned the signal to the right:
Advertising