Audio Damage Axon - Manual (Page 16)

Rate
The RATE control sets the metrical unit of the pulses that trigger Axon’s central Neuron 0. Setting the RATE
control to 1/8 will trigger Neuron 0 every eighth note, setting it to 1/16 will trigger Neuron 0 every sixteenth
note, and setting it to 1/32 will trigger Neuron 0 every thirty-second note.
Transport
The buttons labeled STOP and PLAY start and stop Axon’s internal timing source. Click START to start Axon
playing, click STOP to stop it. (Betcha could have figured out that yourself, eh?) If Axon’s SOURCE control is
set to host, the STOP and PLAY buttons have no effect and Axon plays and stops in sync with your host
program’s transport.
4. Mixer Controls
Clicking the MIXER button near the lower left of Axon’s window reveals the mixer controls:
Each of Axon’s seven synthesizer voices has its own set of mixer controls. Looking from top to bottom, the
controls consist of:
Effects Send slider
This slider sends some or all of the voice’s sound to Axon’s delay and filter effects. Click and drag the slider to
the right to increase the amount of signal sent to the effects section. If all of the FX SND sliders are off (i.e. at
their leftmost position) you won’t hear anything from the effects since they won’t receive any signal.