AvaLAN Wireless AW900mSPI-10 - Manual (Page 37)

PAGE 37 Technical support (650) 384-0000 www.avalanwireless.com
AW900mSPI User’s Manual
18. By clicking the "Data Terminal" tab at the top of the window, you are provided
with a rudimentary means of exchanging data between the connected radios.
19. The Data Terminal Port (the lower numbered COM port associated with the
radio) should be selected from the drop down box near the top of the window.
Data terminal settings (Baud rate, etc.) are pre-selected here from the boot
configuration. They may be overridden if desired without affecting the boot
configuration. Click "Connect" to establish communication between the Data
Terminal and the radio. The text box to the right of the "Connect" button should
give a message verifying a successful connection. The "Connect" button now
changes to a "Disconnect" button. Note that returning to the Boot Configuration
tab and modifying and rebooting the radio will automatically disconnect the
Data Terminal port and pop up an alert message to that effect.
20. Text or binary data mode can be selected using the Mode buttons. Data to be
transmitted should be entered into the one-line black box near the bottom of
the window and will be transmitted to the other radio when "Send" is clicked
or the Enter key is used.