Troubleshooting advanced settings – AvaLAN Wireless AW-H900 User Manual

Page 4

Advertising
background image

aW-H900

User’s Manual

PaGe 4

Technical support

:: (650) 384.0000

www.avalanwireless.com

Troubleshooting

Advanced settings

See the online installation tutorial and FAQ at www.avalanwireless.com.

no Power leD

no radio link leD

radio lInK leD On but link Quality Indicator is low

no ethernet lInK leD

Installing multiple systems in close proximity

Check the power connections.

The units may be too far away to create a good radio connection. Try other locations that may have a less obstructed path, or try

reorienting the antennas.

The radio is looking for its matched partner. If both units are powered up and the Power LEDs are active, they may be too far away

to create the radio connection. Try other locations that may have a less obstructed path, or try reorienting the antennas.

Yagi type

antennae get their best range when they are oriented to point directly at each other with the antenna elements oriented in the

same plane (i.e. vertically or horizontally).

Check your network connections.

See the online installation tutorial and FAQ at www.avalanwireless.com.

automatic frequency selection mode (DIP switches — all OFF for automatic mode)

Manual frequency selection mode

Please see the next page

The AW900x is designed to automatically select and continuously optimize the performance of its radio channel. The radio channel

is monitored to ensure it is providing low error rates necessary for successful radio transmission. In the event that the error rate

rises, the AW900x will autonomously change to a new channel. There are 12 non-overlapping channels.

To restrict the operation of the AW900x to a subset of the 902-928 band, the user may activate a manual selection mode that allows

the radio to automatically choose the best channel

within a grouped subset of the 12 available channels. This is enabled by the 8

position DIP switch on the master unit. These settings allow the AW900x to operate on the optimal channel in one of three subsets,

LOW 4, MID 4, or HIGH 4. The DIP switch settings are:

Advertising