AvaLAN Wireless AW-900i - Manual (Page 6)

aW900i User’s Manual
PaGe 6 Technical support :: (650) 384.0000 www.avalanwireless.com
Technical specifications
Sample application
rF transmission rate
ethernet throughput
Output power
receive sensitivity
latency
Voltage
Current consumption
radio channels
automatic frequency select
Manual frequency mode
status leDs
error correction technique
adjacent-band rejection
Temperature range
Power over ethernet
size 1.536 Mb/s
935 Kb/s
+21 dBm (4 Watts EIRP used with 15 dBi antenna)
-100 dBm at 10e-4 BER (-112 dBm with 15 dBi antennae)
< 1 ms — assuming a dedicated wireless link to client device
5-9 VDC
RX 260 mA TX 350 mA
12 non-overlapping
Yes — radio channel automatically selected and adaptively optimized
Yes
Power, RF Link, Ethernet Link, Traffic, RF RX, RF TX, 4/Channel, and 6/Link Quality
Sub-block error detection and retransmission
> 60 dB — SAW receiver filter attenuates cellular and pager interference
-40
o C to 70 o C
Compatible with common 5V splitters (Linksys WAPPOE)
150 x 85 x 35 mm
CHaraCTerIsTIC sPeCIFICaTIOn / DesCrIPTIOn
HOTel laYOUT UsInG THe aValan WIreless BrIDGe
Hotel rooms
Front office
with 768 Kb/s
T1 service
AW
AP
T1 AW AW AW AP [ [
AW AP [
AW AP [
CAT5 Ethernet cable
Wi-Fi Channel 1
Wi-Fi Channel 6
Wi-Fi Channel 11
Wi-Fi Access Point
AvaLAN Wireless Ethernet Bridge
AW AP