AvaLAN Wireless AW-900T - Manual (Page 6)

aW900T User’s Manual
PaGe 6 Technical support :: (650) 384.0000 www.avalanwireless.com
900 channel table
Technical specifications
rF transmission rate
ethernet throughput
Output power
receive sensitivity
radio link budget
range
radio channels/bandwidth
Manual frequency select
Connector types
status leDs
error correction technique
adjacent-band rejection
regulator type
Power consumption
Voltage
Temperature range
Transmit current draw
size
1.536 Mb/s
935 Kb/s
+21 dBm (4 Watts EIRP used with 15 dBi antennae)
-97 dBm at 10e-4 BER (-112 dBm with 15 dBi antennae)
148 dB with 15 dBi antennae
40 miles LOS with 15 dBi antennae
12 non-overlapping with 2.0833 MHz spacing and 1.75 MHz occupied bandwidth
Channel selected with DIP switch
RF RPTNC Female / Ethernet RJ45 10BaseT / Power Jack P5-2.1 mm ID
Power, Ethernet Link, RF RX, RF TX, 4/Channel, and 6/Link Quality
Sub-block error detection and retransmission
SAW receiver filter attenuates cellular and pager interference
Indoor uses linear regulator and outdoor uses switching regulator
Transmit: Indoor — 1.9 W
Indoor: 5 VDC-7 VDC
Outdoor: Power over Ethernet 9-48 VDC over Ethernet -4/5 positive and 7/8 ground
-40
o C to 70 o C
Indoor: 375 mA Outdoor: 150 mA at 9 VDC
110 mA at 12 VDC
32 mA at 48 VDC
Indoor: 140 x 85 x 30 mm Outdoor: 200 x 80 x 55 mm
CHaraCTerIsTIC sPeCIFICaTIOn / DesCrIPTIOn
Outdoor — 1.25 W receive: Indoor — 1.2 W Outdoor — 0.6 W