Advanced operation, System diagram, Aw5800t – AvaLAN Wireless AW-5800T User Manual

Page 3: User’s manual

Advertising
background image

aW5800T

Advanced operation

User’s Manual

PaGe 3

www.avalanwireless.com

Technical support

:: (650) 384.0000

Continued from Page 2

If the user’s needs change, additional SUs can be added to the network and/or a SU can be reprogrammed to join a different network

and/or a SU can be changed into an AP and/or an AP into a SU. The radios cannot be damaged by incorrect programming. If DIP 1 is

accidentally toggled then DIP 1 can be turned back and the radio still retains all the network associations it had in its previous mode

(assuming that the radio had not yet successfully key exchanged with a new network). An AP can be reset by programming it as a SU to

a new AP and then turning it back into an AP again.

SUs that have not yet received a network key boot up in “key exchange mode” and wait to receive a key. SUs that have received a

network key will boot up for 5 seconds in “key exchange mode” and will look to see if a new AP is present. If a new AP is present, then

the SU exchanges keys with the AP, otherwise the SU begins normal operation after the 5 seconds.

APs that have not yet issued network keys boot up in “key exchange mode” until they have issued network keys to at least 1 SU. Once

the AP has issued keys it will only boot up for 5 seconds in “key exchange mode.” If a SU is present during the 5 seconds, then the

AP will issue new keys to the SU and will then remain in “key exchange mode,” waiting for more SUs to be attached. Once all new

SUs have been attached, the AP must be power cycled. The AP will boot up and will enter normal operation after 5 seconds of “key

exchange mode.”

Please call AvaLAN technical support at (650) 384-0000 if the system topology requires:

More than 16 subscriber units per access point for roaming/mobility applications

Multiple access points that use the same network key for roaming/mobility

Low packet loss rates when using broadcast or multicast Ethernet packets

nOTe: Broadcast and multicast packets (example: DHCP, UDP) are sent once and may experience losses at extended range. Unicast

packets (example: HTTP, TCP) are sent using advanced error correction and retransmission techniques to ensure delivery.

n

n

n

System diagram

* Optional AW23

Panel Antenna

aW5800xT

Outdoor radio

configured as an

access point or

client device

aW5800iT

Indoor radio

configured as an

access point or

client device

Advertising