Aviom A320 - Manual (Page 38)

29 A320 P
ersonAl
M
ixer
U
ser
G
Uide
Treble Tone Control
Use the Treble tone control to add or subtract high frequencies from the stereo mix output. The default
(flat) setting for the Treble tone control is at the center of the LED display; a green LED is shown.
To change the amount of treble frequencies in your mix, press the M
ASter
t
oNe
button until the t
reble
LED
is lit and then turn the central control knob left to remove treble or right to add it. The amount of treble
adjustment is shown with a red LED.
The Treble tone control’s amount is not saved with a Mix Preset.
Bass Tone Control
The master section’s Bass tone control adds or subtracts low frequencies from the stereo mix output. It is
designed as overall tone compensation for the headphones, earbuds, or speaker systems connected to
the A320 Personal Mixer.
The default setting for the Bass tone control is at 12 o’clock (flat). To change the amount of bass frequencies
in your mix, press the M
ASter
t
oNe
button until the b
ASS
LED is lit and then turn the central control knob left
to remove bass or right to add it. The amount of adjustment is shown with a red LED.
The Bass tone control’s setting is not saved as part of a Mix Preset.