Cisco H.323 VC-289 - Manual (Page 27)

Configuring H.323 Gatekeepers and Proxies
H.323 Gatekeeper Configuration Task List
VC-315
Cisco IOS Voice, Video, and Fax Configuration Guide
– krb5-telnet—Uses the Kerberos 5 Telnet
authentication protocol when using Telnet to
connect to the router.
– line—Uses the line password for
authentication.
– local—Uses the local username database for
authentication
– local-case—Uses case-sensitive local
username authentication.
– none—Uses no authentication.
– group radius—Uses the list of all RADIUS
servers for authentication.
– group tacacs+—Uses the list of all
TACACS+ servers for authentication.
– group group-name—Uses a subset of
RADIUS or TACACS+ servers for
authentication as defined by the group
server radius or aaa group server tacacs+
command.
Step 3 Router(config)# radius-server host {hostname |
ip-address} [auth-port port-number] [acct-port
port-number] [timeout seconds] [retransmit retries]
[key string]
Specifies the RADIUS server host.
The keywords and arguments are as follows:
• hostname—Specifies the Domain Name System
(DNS) name of the RADIUS server host.
• ip-address—Specifies the IP address of the
RADIUS server host.
• auth-port—(Optional) Specifies the User
Datagram Protocol (UDP) destination port for
authentication requests.
• port-number—(Optional) Specifies the port
number for authentication requests; the host is
not used for authentication if set to 0. If
unspecified, the port number defaults to 1645.
• acct-port—(Optional) Specifies the UDP
destination port for accounting requests.
• port-number—(Optional) Specifies the port
number for accounting requests; the host is not
used for accounting if set to 0. If unspecified, the
port number defaults to 1646.
• acct-port—(Optional) Specifies the UDP
destination port for accounting requests.
• port-number—(Optional) Specifies the port
number for accounting requests; the host is not
used for accounting if set to 0. If unspecified, the
port number defaults to 1646.
Command Purpose